The minimum hardware requirements are:
MET/TEAM
Server
Database and Web Server (single machine)
·
2.0 GHz quad core
processor or equivalent
·
16 GB of RAM
·
20 GB of
available hard drive space (depending on database size)
Web Server (separate machine from Database server)
·
2.0 GHz quad core
processor or equivalent
·
4 GB of RAM
·
500 MB of
available hard drive space
Database Server (separate machine from Web server)
·
2.0 GHz quad core
processor or equivalent
·
16 GB of RAM
·
20 GB of
available hard drive space (depending on database size)
MET/TEAM
Client
• 1.0 GHz Pentium 4 processor or equivalent
• 2 GB of RAM
• Minimum screen/display resolution listed is 1024x768
MET/CAL
Client
• 2.0 GHz Pentium 4 processor or equivalent
• 4 GB of RAM
• 6 GB of available hard drive space
The optional General Purpose Interface Bus (GPIB) connects a PC to a programmable instrument. Before installation, make sure that the optional GPIB (IEEE 488) Interface is installed. Fluke Calibration Software only supports GPIB controllers from National Instruments.
You can download hardware drivers from the National Instruments website:
If you plan to use or calibrate National Instruments PXI cards, the PXI chassis must be connected to the workstation computer before the computer is powered on. Also, any time you need to insert or remove cards from the PXI chassis, the workstation computer that the PXI chassis is connected to must be powered off first. For more information, visit the National Instruments website: http://www.ni.com/pxi/.
The Fluke Calibration website contains any information on requirements that may have changed since the Help was updated. Refer to http://us.flukecal.com/ .